VIDEO
Video Input Level: 1.0 V p-p nominal, 2.0 V p-p
maximum.
Input/Output
Impedance: Terminated: 75 ohms.
Looping: High impedance (15 kohm).
Input to Input
Isolation: 60 dB at 4.2 MHz.
Video Gain: Unity, ±0.3 dB.
Video Frequency
Flatness: 100 kHz to 10 MHz ±0.9 dB.
Total Bandwidth: 1 Hz to 20 MHz, @ -3 dB.
Tilt: Less than 1%.
Field/Line
Short-Time Distortion: Less than 1%.
Chrominance to
Luminance Delay: Less than 50 nsec.
Crosstalk Isolation: Typically 50 dB at 4.2 MHz between
two adjacent input channels routed
to two adjacent output channels.
Hum and Noise: 70 dB below 1 V p-p up to 5 MHz.
Signal-to-Noise
Ratio: Greater than 70 dBrms typical
unweighted, 15 kHz to 5 MHz.
ELECTRICAL
Input Voltage: 90-265 VAC, 50/60 Hz.
Power Consumption: 28 W.
Heat Equivalent: 1.6 btu/min. (0.4 kg-cal/min).
NOTE: These figures represent the
conversion of 100% of the electrical
energy to heat. Actual percentage of
heat generated will be less and will
vary from product to product. These
figures are provided as an aid in
determining the extent of cooling
required for an installation.
Alarm Inputs: All inputs are NC or active high
(CMOS/TTL compatible).
32 inputs from receivers; 32 direct
alarm inputs.
Alarm Output: Normally open (NO) relay closure pro-
vides operation of remote units such
as VCRs under alarm conditions.
Relay rated at 0.5 A, 30 V.
Line Cord: Detachable IEC320 three conductor
cable with grounded plug.
Fuse: 2 A, 250 V, 3AG.
Radio-Frequency
Emission Standards: FCC class A.
CONNECTORS
Power: IEC320 recessed three-pin male
connector with built-in fuse tray and
power switch.
Video Input: 32 BNC connectors.
Looping Video Output: 32 BNC connectors.
Video (Monitor)
Outputs: 8 BNC connectors.
Alarm Input: Alarms may be input to the V1422
either via receivers at the camera sta-
tions or directly via a D-shell
connector on the V1422.
RS-232 Host
Computer: 9-pin D-shell connector.
RS-232 Printer
Output: 9-pin D-shell connector.
Remote Operator
Keypads: The trunk line for remote keypads
connects at a 9-pin D-shell connector.
Receivers: NOVA: The trunk line for receivers
connects at a 9-pin D-shell connector.
Vicoax: BNC connectors.
Auxiliary Alarm
Output: Detachable 3-pin screw terminal
block.
MECHANICAL
Dimensions: Height (H): 3.47 in. (88 mm).
Width (W): Rack-Mount:
19.0 in. (483 mm).
Desk-Top:
17.0 in. (432 mm).
Depth (D): 12.4 in. (315 mm).
Weight: 14.7 lb (6.7 kg).
Construction: Steel and aluminum chassis.
Finish: Front panel painted black.
ENVIRONMENTAL
Operating
Temperature Range: 32 to 122° F (0 to 50° C).
Operating
Humidity Range: Up to 90% relative, noncondensing.
Storage
Temperature Range: -20 to 140° F (-29 to 60° C).
Storage Humidity: Up to 85% relative, noncondensing.
4
Copyright © 2003 Vicon Industries Inc. All rights reserved. Vicon and its logo are registered trademarks of Vicon Industries Inc.
TEL: 631-952-2288
FAX: 631-951-2288
TOLL FREE: 800-645-9116
89 Arkay Drive
Hauppauge, NY 11788
www.vicon-cctv.com
Technical Information
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji